FIREFIN IS THE TOOL-LESS, UNIVERSALLY MOUNTABLE FIN SYSTEM FOR TWIN-TIP KITEBOARDS.
NO TOOLS NEEDED TO EASILY EXCHANGE FIREFINS TO CUSTOMIZE YOUR BOARD PERFORMANCE AND STYLE IN SECONDS.
THE PLUG AND PLAY SYSTEM ENSURES YOU TRAVEL WORRY FREE WITHOUT DAMAGING YOUR GEAR.
The Starter Pack is your easy entry into the Firefin system.
Welcome to the future of Kiteboard fins.
FINS MATTER
FINS HAVE A HUGE IMPACT ON THE PERFORMANCE AND CHARACTERISTICS OF YOUR BOARD
FINS ARE A KEY COMPONENT
THAT GREATLY INFLUENCE
SOME OF THE MOST
IMPORTANT ASPECTS
WHEN YOU RIDE
POP
GRIP - SPEED - CONTROL
EDGING - BOOSTING
POWER - TAKE OFF - LANDING
FIN ANATOMY
THE KEY PARAMETERS DEFINING THE DESIGN AND CHARACTERISTICS OF THE FIN
HEIGHT (DEPTH)
The height, also refered to as depth, is defined as the distance the fins penetrate into the water.
By increasing the height, the fin gains more grip which is useful for up-wind and pop capabilities. Lowering the depth proportionally can achieve a more skatey feeling without losing grip.
LENGTH (BASE)
The length is the dimension along the board also known as base.
It has an impact on the drive of the board as well as directional stability and turning speed. Alterations can generate enough grip while still maintaining a low profile.
AREA
The area of the fin defines how much grip you have in water, the power you can generate, and the responsiveness of your board.
Depending on the proportions of the fin area different performance characteristics can be achieved. Alterations to the base and depth make it possible to design a large variety of fins, depending on the riders choice.
CHOOSE YOUR RIDE
FINS
To get you started with your Firefin experience, three heights and two lengths reflecting the most commonly used fins are currently available.
Whats in the Box
4x - FF43 / 50mm fin
4x Base
9x - K40x18mm Philips pan-head screws
9x - K40x18mm Philips counter-sunk screws
9x - K40x22mm Philips counter-sunk screws
1x Screw length measure tool
1x pouch
1x sticker set
1x User manual
1x Pack A color Box